Edgar Allen Poe s Style Of Drama And Personification

Edgar Allen Poe was one of the most well-known, albeit short-lived, authors and poets of the early 19th century. Regardless of his passing at the young age of 40, his works lives on to this very day. His style for writing in dramatic fashions and being the original horror author have left a mark on literature history. The short stories of The Raven and The Cask of Amontillado were some of the more well-known works of Edgar Allen Poe. Reading his past works it is noticeable that he only wrote in the first person or rather wrote using only I. This was one of the more common themes presented into his work. However, there are other methods that Poe practiced when writing both poems and short stories that are greatly influenced to new writers†¦show more content†¦Personification was a special style in some of Poe s later works as well. Another one of Poe s later works that uses the tool of personification is a personal favorite, The Tell-Tale Heart. This was another Gothic-style and horror writing that Poe was famous for. It also plays a considerable amount of personification writing style. Again Poe uses first person narration in this work to place himself in the story. The Tell-Tale Heart tells of Poe murdering an old man whom he had no prior qualms about. The old man had done nothing to him and he knew of that. Poe murders the old man and buries him in the flooring of the house. Poe describes that he does not hear the beating of the old man s heart anymore after the old man died. However as time moved on, he could hear beating sounds. While trying to debunk the sounds as nothing but mice in the floor of the house, he eventually starts to think otherwise. Despite all of his debunking of what it could possibly be, the sounds of the beating begin to taunt and torment Poe. The final paragraphs of the short story shows the torments that the beating does to Poe. As the torments continue, Poe comes to realization that the beating sound was the very heart of th e old man that he had murdered. The final line signifies what the heart is supposed to personify. Villains! I shrieked, Dissemble no more! I admit the deed!

Human Trafficking Prostitution And Prostitution - 981 Words

Human Trafficking in Prostitution Prostitution, â€Å"Providing or receiving sexual acts, between a prostitute and a client, in exchange for money or some other form of remuneration† (Hock 557). The idea of exchanging sex for valuables has been seen since the beginning of human society. The first reported data about prostitution was reported around 3000 B.C.E in Mesopotamia, one of the first known civilizations (Caraboi and Fierbinteanu 362). Also, prostitution is often referred to as â€Å"the world’s oldest profession.† Today, even though prostitution is illegal in most parts of the world, prostitution is still prevalent worldwide with many forms of prostitution and ways to exchange sexual services for payment. Street walkers are prostitutes who sell their services on the street, usually with the customer typically driving up to the prostitute. According to Roger R. Hock, professor of human sexuality and author of the textbook Human Sexuality, street walke rs face the highest risk for arrest, violence and contracting sexually transmitted infections (STI’s) (Hock 558). Escorts can also be prostitutes; they are contacted in private by clients and are usually at less risk of violence. Another type of prostitute is brothel workers; brothel workers work in â€Å"a house of prostitution,† a brothel and are normally in areas with legal prostitution (Hock 560). These three types of prostitutes are the most common form of prostitution and can be seen worldwide. Similar to prostitution,Show MoreRelatedHuman Trafficking and Prostitution542 Words   |  2 Pageswidely acceptable in many countries around the world which is quite an distressing and foreign concept to me. I also learned that human trafficking is disturbingly prevalent in the United States and the need for more attention needs to be brought to this crime. And finally, I learned that prostitution is not a victimless crime. Many women are forced into prostitution. These three pieces of information will unfortunately carry on with me the rest of my life. In all areas of the world, ladies andRead MoreHuman Trafficking And Forced Prostitution1965 Words   |  8 Pagesand transportation can be done instantaneously has led to an increase in trafficking and prostitution over the past ten years. According to the United Nations Report, the trade now is worth about thirty billion dollars. Human trafficking and forced prostitution is a serious concern when it comes to being a global issue because it is a heinous violation of human rights. The upward trend of human trafficking and forced prostitution is a crime that victimizes men, women, and children. Traffickers are knownRead MoreProstitution Is Legal For Human Trafficking1010 Words   |  5 Pagesâ€Å"Are you serious? Girls are not just objects, they are human beings just like everyone else.† That disgusts me, are the thoughts I was having when I saw that Thailand has a total of around three million sex workers in their country, and the number is increasing. Prostitution is legal but human trafficking is not. How can we make prostitution legal and then not expect is to lead to more human trafficking around the world. Prostitution is the practice or occupation of engaging in sexual activity withRead MoreHuman Trafficking In Russia: Prostitution661 Words   |  3 PagesHuman Trafficking In Russia: Prostitution Human trafficking is one of the major problems that is facing Russia. And Russia is considered the largest country in the whole world. It is massively known for the origin and final destination of trafficked men, women, and children who are forced to labor. Trafficking is carried out mainly for the purpose of exploitation, which includes prostitution, forced labor, slavery, removal of organs and many others (human trafficking in and out of Russia). This isRead MoreHuman Trafficking and Prostitution in Russia2058 Words   |  9 PagesHuman Traficking In Russia: Prostitution human trafficking in Russia.-prostitution. Russia is considered the largest country in the whole world. It is massively known for the origin and final destination of trafficked men, women, and children who are forced to labour. Human trafficking is one of the major problems that is facing Russia. Trafficking is carried out mainly for the purpose of exploitation, which includes prostitution, forced labour, slavery, removal of organs and many others (humanRead MoreProstitution And Human Sex Trafficking1291 Words   |  6 Pagesshort in protecting ones right to rule over their own body. Prostitution, the exchanging of sexual services for payment, has been specifically outlawed by the State of New York. This direct targeting of the sex trade within New York leaves many people unprotected under the law, both in consensual prostitution and nonconsensual human sex trafficking, while greatly eliminating the potential tax revenue that would be generated. Prostitution, when involving consenting adults, is a victimless crime andRead MoreHuman Trafficking And Child Prostitution1145 Words   |  5 Pagesworld has to make a living somehow. The most unprotected and risky profession, in my opinion has to be prostitution. These men and women go to work without knowing who they will have to deal with and what could possibly happen to them. These individuals participate in this line of work not only to provide for themselves, but also for family members. In essence, the government should legalize prostitution because it would protect their rights, ensure safety, and benefit their health. I believe pushingRead MoreProstitution and Human Trafficking Essay3070 Words   |  13 PagesProstitution has been referred to as the oldest profession. Prostitutes can be found in every city and country across the globe. There are a large number of individuals who are currently in the United States and around the world who can be classified as a prostitute. They are expanding from the traditional street level prostitutes to highly paid, high class, prostitutes or escorts. Yet, what exactly would drive those men and women to pursue this class of work, once in this type of work what keepsRead MoreHuman Trafficking And Child Prostitution2104 Words   |  9 Pagesfrom President Barack Obama in 2012 addressing human trafficking and child prostitution within the U.S. In America, there is a conception that human trafficking only happens in less-developed countries. However, the U.S. is the second most prominent destination country for human trafficking in the world (Hodge Lietz, 2007). Cities such as Atlanta, Chicago, Los Angeles, and Detroit are amongst the U.S. cities with high incidences of child prostitution (Hodge Lietz, 2007). Some of these childrenRead MoreTrafficking of Human and Children for Prostitution and Regulation4912 Words   |  20 PagesWhat is Trafficking? Human trafficking is the illegal trade of human beings mainly for the purposes of commercial sexual exploitation or forced labour. Other purposes can be extraction of organs, or tissues or even surrogacy or ova removal. It can also be regarded as modern form of slavery. Trafficking is a lucrative industry. It is second only to drug trafficking as the most profitable illegal industry in the world. In 2004, the total annual revenue for trafficking in persons were estimated to

Supply Chain Information Management

Questions: 1.How IoT improves the efficiency in the supply chain? 2.Use an example of fresh food to explain how IoT helps improving fresh food supply chain? 3.Discuss GTP components and processes? Answers: Internet of Things 1. The Internet of Things include the types of the technologies that drives towards the adoption of the high personalized smart consumer lifestyle. It includes the supply chain management where the IoT impacts the business as well as disrupt the logistics. ERP and supply chain management (SCM) includes the IoT revolution that allows the enhancement of the solution with an intelligent connection to the people, process, data and the things. The supply chain is impacted mainly by IoT with the in-transit visibility, where the products are handled and transferred in between the manufacturers, suppliers as well as the other forms of the distribution centers. (Gunasekaran et al., 2016). The nodes of the supply chain call for the agile supply network with regards to the product whereabouts as well as the other specifications. The in-transit visibility is mainly for the cloud based GPS with Radio Frequency Identification technology (RFID) technology. It provides the identity, location, and tr acking of information. The data gathered from the technologies includes the detailed visibility of the items which also provides the way mainly from the manufacturer to the retailer. The data is gathered from the GPS, and the RFID technology does not allow for any supply chain to automate the process of shipping. (Majeed et al., 2017). Hence, one needs to monitor the important details like the control of the temperature that has a significant impact on the product. IoT has been able to provide the supply chain professionals through: Reduced loss of the assets, with the product issues for finding the solution. The saving of the costs of the fuel along with optimizing the fleet routes to monitor the conditions of the traffic. The assurance of the stability of the temperature and to monitor the cold chain as per the Food and Agricultural Organisation of UN. The management of the stock for the warehouse (Ramundo et al., 2016). A proper gain of the user insights will help in embedding the sensors along with providing better visibility for the customer as well as the usage of the product. The creation of the fleet efficiencies helps in reducing the redundancies as well. For example, the information provided for the traffic jam as well as the delay is of great importance rather than getting stuck in the traffic, at the time of traveling. With this context, there is a need to focus on enhancement of the supply chain management by using IoT. The IoT Supply chain involves the multiple touch points, where the manufacturers, suppliers, customers need a proper visibility, and access to the accurate information. The IoT will help in improving the product visibility with the supply chain management to see the data for the packages, equipment for the materials, vehicles and the warehouses from the different devices like the GPS and the RFID readers. (Ramundo et al., 2016).The technologies are strengthened where the sensors are strongly informed for the supply networks which are also able to predict, correct and prevent the problems like the inventory outages, or the failure of the equipment, poor conditions of the environment or any other safety hazards. 2. The consumers expect that the restaurants and the grocery stores can deliver fresh food. Hence, to bring an awakening for the food distributors, who ship the items like the meat, milk, fruits or vegetables, need to deal with IoT. IoT can easily help the companies to check and monitor the shipment of the food, thereby, reducing the spoilage of the food or the waste. Example, the farmers mainly depend on the seed manufacturing to deliver the quality seed so that there is maximized harvest action. (Voss et al., 2017). The supply chain managers can easily track through the devices for the temperature of the seed container as well as the humidity. The IoT app can easily alert the delivery driver for any unsealed container. With the IoT technology, the sensors are also necessary for the farms to make sure that they are getting the proper temperature and the moisture, important for the crop growth. IoT can help in improving the food industry management with its supply chain. (Paksoy et a l., 2016). The farms, food distributors, grocery stores (selling the milk, meat, etc.,) and the restaurant now have the solution to track and monitor the cargo from farm to the fork. With the more progressive globalization of the food supply chains, there is a covering of the greater distances and involvement of the suppliers, with exposure of the food products to the different risks factors. Hence, for this, the IoT-based food supply chains help in providing a better service with the smart insights to ensure the product quality from farm to the fort. The sensing technology and the data analytics helps in monitoring the condition of the product, mainly due to the network-connected smart sensors. (Rezaei et al., 2017). The goods-on-transit with the maintenance of the temperature and humidity in the shipping container or the truck is given for a particular moment. The network has been set with the perishable goods like the meat, fish, dairy, or the fresh products. The real-time cargo helps in monitoring the network, and the data can easily assist in avoiding the spoilage with offering all the essential actions for the manufacturers with certain alerts of safety as and when the goods condition deviates from the identified parameters. (Ramundo et al., 2016). The improved forms of the supply chain visible will lead to the reduction in the waste of food and prolonged life of the products. The food manufacturers can also get a significant benefit from the reduced inventory costs as well as work on the capital management that can cut down the inventory levels without any risk. 3. GTP systems Goods-to-person means that the order picker in the warehouse can stay at a particular place and the system can bring the goods or stock keeping units (SKU) to a person. It includes the forms where the SKU is picked and then it is reverted to the actual location of the storage. (Christopher et al., 2016). The components that include in this are: The storage medium which is necessary for the inventory of the product. The methods which are depending upon the technology along with bringing the SKU for the picking from the station. The workstation of the ergonomics as well as the software to control and handle the flow of the SKU. For this, there are ways in which the processing of the order could easily be fulfilled. SKU works on the order container as well as the other forms of the multiple orders. Variations are depending upon the configurations and the designs that offer benefits. (Richards et al., 2016). The processes that it includes are: The elimination of the travel time of the picker where the orders do not have to walk in the warehouse. This will also reduce the time of travel with the improvement in the productivity as well as the cost of labor work will reduce per hour, automatically. The reduction in the footprint of the system includes the designs which are less than any other conventional form. The typical types of the footprint range from 30-50% which is less than the conventional order fulfillment center. (Richards et al., 2016). The security of the product with the automated system is secure that is also not accessible to the staff as well. The ergonomic workstations are for the picking the products and give comfort to the employee as well. The accuracy and the de-coupling of the workstations work with the order picking where the operators are also able to handle the SKU at a time, along with working in the parallel form that is unaffected. The workstations are also highly utilized where the flow of work is mainly in the pickup stations. The order pickers are using it without any wait. (Coyle et al., 2016). A precise sequencing helps in building the customer order where the SKU could easily be achieved. For this, the items need to be presented for the order by weight. Apparel distribution is a challenge. Discuss how GTP can improve apparel distribution. Give an example of a Fashion company who is using GTP for apparel distribution and list its benefits for that company. GTP works on the distribution of the product in and around the different workstations, but the distribution with apparels is a challenge. The batch picked products are transported for sorting and consolidating the workstations. It is based on the light directed display where the SKU is also picked and then distributed for the different forms of the discretised orders. The apparel and the accessories retailer use the automated zone of the GTP system. (Richards et al., 2016). There are 20 order zones for the picking in the system. Hence, for 1000 stores, there is a need for 50 store positions of the carton. Hence, a particular operator works in the zone, which contains a single SKU. It is then removed from the storage and then routed for the picking zones. The carton of the SKU works on traveling on to the different zones where the order is stored. The automated versions help in picking 325 picks by the operator in an hour. TGW Fashion Company use this technique which focuses on the value for money. The supply chain of the fashion company is mainly to cope with the demands and relate to the increasing flexibility as well as the improved level of service. The results are primarily the brand multi-channel, fast fashion brand Omni-channel, and the value fashion brands. (Schonsleben, 2016). The benefits for this are: Secured dense storage that reduces the cost of the building and the land. The higher productivity also reduce the cost of the labor It helps in achieving and aiming for 500-1000 picks in an hour by the picker. The ergonomic picking helps in a sustainable productivity The picking is through the shipping containers that tends to reduce the packing labor as well. The improvement in the inventory as well as the accuracy in the order. TGW has been able to create a better demand for the supply chain operations with ensuring that the customer remains happy with minimized costs and the maximized profits. (Gilling et al., 2016). Hence, for this, the company is also working on providing the flexibility and the speed which facilitate the shorter leading time along with handling the different channels for the distribution. The benefits are based on the range of industries with sectors set to offer and implement the system efficiently. Conclusion and Recommendations The supply chain management is the best form of the movement and the storage of the raw materials. The companies are interlinked with the networks, channels and the nodes, for the different products and the services. (Afolayan et al., 2016). The SCM practice is based on the operations management, procurement, information technology and the marketing standards with long-term performance. The customer-focused strategies are based on creating customer satisfaction with end point delivery to the customers. References Naskar, Suvendu, Preetam Basu, and Anup K. Sen. "A Literature Review of the Emerging Field of IoT Using RFID and Its Applications in Supply Chain Management." InThe Internet of Things in the Modern Business Environment, pp. 1-27. IGI Global, 2017. Gunasekaran, Angappa, Nachiappan Subramanian, and Manoj Kumar Tiwari. "Information technology governance in Internet of Things supply chain networks."Industrial Management Data Systems116, no. 7 (2016). Majeed, Aabid Abdul, and Thashika D. Rupasinghe. "Internet of Things (IoT) Embedded Future Supply Chains for Industry 4.0: An Assessment from an ERP-based Fashion Apparel and Footwear Industry."International Journal of Supply Chain Management6, no. 1 (2017): 25-40. Ramundo, Lucia, Marco Taisch, and Sergio Terzi. "State of the art of technology in the food sector value chain towards the IoT." InResearch and Technologies for Society and Industry Leveraging a better tomorrow (RTSI), 2016 IEEE 2nd International Forum on, pp. 1-6. IEEE, 2016. Voss, Stefan, Hans-Jurgen Sebastian, and Julia Pahl. "Introduction to Intelligent Decision Support and Big Data for Logistics and Supply Chain Management Minitrack." (2017). Paksoy, Turan, ?smail KARAO?LAN, Hadi Gken, Panos M. Pardalos, and Belk?s TOR?UL. "An Experimental Research on Closed Loop Supply Chain Management with Internet of Things."Journal of Economics Bibliography3, no. 1S (2016): 1-20. Rezaei, Mahdi, Mohsen Akbarpour, and Behroz Karimi. "IoT-based framework for performance measurement: a real-time supply chain decision alignment."Industrial Management Data Systems117, no. 4 (2017). Christopher, Martin.Logistics supply chain management. Pearson UK, 2016. Gilling, Raymond I., and Jeffrey M. Ulmer. "Major Challenges in Supply Chain Management."Insights to a Changing World Journal2016, no. 3 (2016). Richards, Gwynne, and Susan Grinsted.The Logistics and Supply Chain Toolkit: Over 100 Tools and Guides for Supply Chain, Transport, Warehousing and Inventory Management. Kogan Page Publishers, 2016. Coyle, John J., C. John Langley, Robert A. Novack, and Brian Gibson.Supply chain management: a logistics perspective. Nelson Education, 2016. Schnsleben, Paul.Integral logistics management: operations and supply chain management within and across companies. CRC Press, 2016. Afolayan, Ademola, Gareth RT White, and Rachel Mason-Jones. "

King Lear Play Essays - King Lear, British Films,

King Lear Play In the play King Lear written by William Shakespeare a collection of images are used to express different points Shakespeare is trying to relay to his audience. One reoccurring image that kept popping up was animal images. Shakespeare displays these animal images when King Lear and many of the other characters in the play talk about Goneril and Regan. The animals that Lear and the other characters compare the two sisters to are not very pretty. They are compared to the likes of tigers, serpents, and even monsters. These reoccurring images have an important idea behind them that Shakespeare hopes to communicate his readers. Shakespeare waste no time in comparing Goneril and Regan to animals. When Lear parts from Goneril at the end of Act I, after she has sneered at him and diminished the number of his retainers, he calls her a "Detested kite" (I. iv. 269.). He also compares her to "the sea-monster" (I. iv. 268.), by which he possibly means a mythological monster that would betray its own father. King Lear also comments on his daughters ingratitude using animal imagery when he said," How sharper than a serpent's tooth it is to have a thankless child" (I. iv. 295-296.). Lear comments once more on his daughter's "monster ingratitude" (I. v. 40.). Lear is showing how he feels about how his daughters are treating him by comparing them to unpleasant animals. Lear in scene IV has a quarrel with his other daughter, Regan, where again he uses animal images to show how his daughters are sinking below manhood to animals. Lear seeks out his daughter, Regan, at Gloucester's castle, and finds out that her husband has put his faithful friend Kent in the stocks and that both husband and wife have retired to bed and do not wish to see him. When Regan finally comes down, she tells him "You should be ruled, and led by some discretion that discerns your state better than yourself" (II. iv. 147-149). Lear responds by saying"struck me with her tongue, most serpentlike, upon the very heart. (II. iv. 159-160). Lear here again is describing Regan to a serpent, which is a large poisonous snake. Both daughters seem to him now like unusually cruel animals. They show this when they shut him out into the stormy night. In the storm scene, Lear's hurt from his daughters affect his attitude to the mad Tom of Bedlam (Edgar). He thinks, on the analogy of his own suffering, that his daughters must have abused Poor Tom. Nothing else could have brought him to such a pathetic state. This reminds Lear of his own "pelican daughters" (III. iv. 75). This is an allusion to the medieval belief that pelican young fed on the blood of the parent bird. This analogy compares to how Lear's daughters are feeding on him giving them the control of the kingdom. Shakespeare uses these animal images throughout his play to describe Goneril and Regan. It will be noticed that most of the animals used in these comparisons are unpleasant (kite, serpent, tigers, pelicans, foxes, and even monsters). Shakespeare is showing that the sisters are sinking from the level of man, who stood between the angels and the animals, to the level of the animals. They have become like some of the most unpleasant birds and animals of prey. In their cruelty and unnaturalness they are less than human.